Architectural Sealers
-
Tenon® 40% Silane Sealer
Tenon® 40% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect, and seal fully cured fresh concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129870), 5 gal. pails (BOM #129860), and 55 gal. drums (BOM #129597).
-
Tenon® 40% Silane Sealer WB
Tenon® 40% Silane Sealer WB is a VOC-compliant, clear, non-yellowing concrete sealer that penetrates deeply and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and spalling, freeze damage, and rebar corrosion due to moisture interaction. It is suitable for use to protect and seal fully cured new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer WB is designed for use above-grade exterior applications that are not subjected to hydrostatic pressure. Available in 1 gal. bottles (BOM #114417), 5 gal. bottles (BOM #114427), and 55 gal. drums (BOM #114415).
-
Tenon® Burnished Block Sealer WB Matte
Tenon® Burnished Block Sealer WB Matte is used as a final sealer on masonry block walls, including burnished block or ground face block, architectural block, brick, slate, paving stones, terrazzo, quarry tile, and cementitious materials. It enhances the beauty of the surface, giving it a rich, wet look without the gloss. It forms a breathable membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, plus is protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a durable polysiloxane that does not yellow when exposed to the sun's UV rays. Available in 1 gal. bottles (BOM #130090), 5 gal. pails (BOM #130080), and 55 gal. drums (BOM #129695).
-
Tenon® Salt Barrier ES
Tenon® Salt Barrier ES (Exempt Solvent) is designed to protect and extend the life of concrete, masonry, pavers, retaining walls, and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier ES provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surface. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete to protect against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier ES is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #113370), 5 gal. pails (BOM #113360), and 55 gal. drums (BOM #113358).
-
Tenon® Surface Renew
Tenon® Surface Renew is a clear cleaning solution to revitalize and rejuvenate aged, sealed concrete.
-
Tenon® Burnished Block Sealer
Tenon® Burnished Block Sealer is used as a final sealer on masonry block walls, including burnish block or ground face block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer enhances the beauty of the surface, giving it a rich, wet-look sheen. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a blend of methacrylate polymers, this aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays. Available in 1 gal. bottles (BOM #121100), 5 gal. pails (BOM #129530), and 55 gal. drums (BOM #121101).
-
Tenon® Burnished Block Sealer WB
Tenon® Burnished Block Sealer WB is used as a final sealer on masonry block walls including burnished block or ground face block, architectural block, brick, slate, paving stones, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer WB enhances the beauty, giving the surface a rich, wet-look sheen. It forms a breathable membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, plus it protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with an acrylic that does not yellow when exposed to the sun's UV rays. Available in 1 gal. bottles (BOM #121110), 5 gal. pails (BOM #121107), and 55 gal. drums (BOM #121113).
-
Tenon® Concrete & Masonry Sealer WB
Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gal. bottles (BOM #120673) and 5 gal. pails (BOM #120674).
-
Tenon® Cure & Seal WB 1315
Tenon® Cure & Seal WB 1315 is a film-forming compound that meets ASTM C1315 (Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete) performance standards for water loss when applied properly to cure, seal, and harden freshly placed concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Cure & Seal WB 1315 will pass all VOC-compliance laws and is formulated to cure, seal, protect, and dustproof concrete, as well as seal many types of porous tile and resilient floors. Designed for both exterior and interior applications, it is particularly recommended for indoor work in public buildings (for example, hospitals and restaurants) and private residences where solvent-based systems are difficult to use. The white solution dries clear and provides a dust-free surface. This product provides maximum hardness to the concrete as well as resistance to traffic abrasion. Construction debris are easier to clean. Compatible with most tile and carpet adhesives. Available in 1 gal. bottles (BOM #129910), 5 gal. pails (BOM #129920), and 55 gal. drums (BOM #129930).
-
Tenon® Paver Guardian
Tenon® Paver Guardian is designed to protect and extend the life of installed pavers without changing the finished look. Paver Guardian provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete to protect against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion, as well as protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Paver Guardian is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129670), 5 gal. pails (BOM #129660), and 55 gal. drums (BOM #129534).
-
Tenon® Paver Guardian WB
Tenon® Paver Guardian WB is designed to protect and extend the life of installed pavers, retaining walls, and other cementitious surfaces without affecting the finished look. Paver Guardian WB provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, waterborne formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage, efflorescence, and chemical erosion. Paver Guardian WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Paver Guardian WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129780), 5 gal. pails (BOM #129790), and 55 gal. drums (BOM #129567).
-
Tenon® Paver Seal
Tenon® Paver Seal is designed to protect and extend the life of installed pavers, while enhancing the color and adding a matte finish. Made with a blend of methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, architectural concrete, brick, natural tile, and other cementitious materials. Paver Seal will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate yet it keeps a matte finish. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129730), 5 gal. pails (BOM #129720), and 55 gal. drums (BOM #129551).
-
Tenon® Paver Seal Pro WB
Tenon® Paver Seal Pro WB is a penetrating, breathable, waterborne sealer designed to protect and extend the life of installed pavers, while enhancing the color with a natural, non-gloss finish. Made with a durable polysiloxane that does not yellow when exposed to the sun's UV rays, it penetrates deep in the capillaries of the paving stones for increased protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. Paver Seal Pro WB will enhance the beauty of pavers, stone veneer, and architectural concrete by making colors more vibrant while protecting surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants, and making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129770), 5 gal. pails (BOM #129760), and 55 gal. drums (BOM #129563).
-
Tenon® Paver Seal & Shine
Tenon® Paver Seal & Shine is designed to protect and extend the life of installed pavers, while enhancing color and adding a gloss finish. Made with a blend of methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, architectural concrete, brick, natural stone, and other cementitious materials. Paver Seal & Shine will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate by giving it a rich, wet-look gloss. It provides a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129690), 5 gal. pails (BOM #129680), and 55 gal. drums (BOM #129539).
-
Tenon® Paver Seal & Shine Pro WB
Tenon® Paver Seal & Shine Pro WB is a penetrating, breathable, waterborne sealer designed to protect and extend the life of installed pavers, while enhancing the color and adding a wet-look gloss. Made with a durable acrylic that does not yellow when exposed to the sun's UV rays, it penetrates deep in the capillaries of the paving stones for increased protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. Paver Seal & Shine Pro WB will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate by giving it a wet-look finish while protecting surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants and making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129710), 5 gal. pails (BOM #129700), and 55 gal. drums (BOM #129545).
-
Tenon® Paver Seal Ultra Shine
Tenon® Paver Seal Ultra Shine is a high-solids, low-viscosity, sprayable sealing agent designed to protect and extend the life of installed pavers, while enhancing color and adding a high-gloss, wet-look finish. Made with a blend of 100% methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on architectural concrete, brick, natural stone, and other cementitious materials. Paver Seal Ultra Shine will enhance the beauty and vibrancy of colored or stamped concrete and exposed aggregate, giving it a rich, high-gloss finish. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129750), 5 gal. pails (BOM #129740), and 55 gal. drums (BOM #129556).
-
Tenon® Salt Barrier
Tenon® Salt Barrier is designed to protect and extend the life of concrete, masonry, pavers, retaining walls, and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surfaces. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete. This product protects against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making those surfaces easier to clean. Salt Barrier is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129820), 5 gal. pails (BOM #129830), and 55 gal. drums (BOM #129585).
-
Tenon® Salt Barrier WB
Tenon® Salt Barrier WB is designed to protect and extend the life of concrete, masonry, pavers, retaining walls, and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier WB provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surfaces. This clear, water-based formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage, efflorescence, and chemical erosion. Salt Barrier WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129840), 5 gal. pails (BOM #129850), and 55 gal. drums (BOM #129587).
-
Tenon® 100% Silane Sealer
Tenon® 100% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry in order to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect and seal fully cured fresh concrete, cast in place, precast, and high-strength concrete materials. 100% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. It is excellent for treating high-traffic areas or surfaces that receive high salt concentrations such as coastal piers. Available in 1 gal. bottles (BOM #129890), 5 gal. pails (BOM #129900), and 55 gal. drums (BOM #129652).
-
Tenon® 20% Silane Sealer
Tenon® 20% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect, and seal fully cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. Silane sealers are used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129980), 5 gal. pails (BOM #129970), and 55 gal. drums (BOM #129644).
-
Tenon® Siloxane Final Seal
Tenon® Siloxane Final Seal is an aromatic, solvent-based concrete sealer and water-repellant used to protect cementitious surfaces against the damage caused by water penetration. Can be applied to surfaces where a cure and seal coating was previously applied. Available in 1 gal. bottles (BOM #120828), 5 gal. pails (BOM #120827), and 55 gal. drums (BOM #120829).
-
Tenon® Siloxane Sealer
Tenon® Siloxane Sealer is a clear, solvent-based sealer for concrete and cementitious materials. It penetrates and reacts chemically within the capillaries to repel water and protect from the damaging effects of rain, water penetration, chemicals, salt, freeze-thaw cycles, and smog. Provides natural-looking, non-yellowing, invisible protection. Available in 1 gal. bottles (BOM #120826), 5 gal. pails (BOM #120825), and 55 gal. drums (BOM #120934).
-
Tenon® Super Clear Coat
Tenon® Super Clear Coat is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on burnished block, architectural concrete, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Enhances the colors of the surfaces with a rich, wet-look sheen. Available in 1 gal. bottles (BOM #120831), 5 gal. pails (BOM #120830), and 55 gal. drums (BOM #120832).
-
Tenon® Super Clear Coat Matte
Tenon® Super Clear Coat Matte is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic, solvent-based sealer does not yellow under the sun's UV rays. It enhances the beauty of colored or stamped concrete and exposed aggregate yet keeps a matte, low-gloss finish. Available in 1 gal. bottles (BOM #120834) and 5 gal. pails (BOM #120833).