Water Repellents
-
Tenon® 40% Silane Sealer
Tenon® 40% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect, and seal fully cured fresh concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129870), 5 gal. pails (BOM #129860), and 55 gal. drums (BOM #129597).
-
Tenon® 40% Silane Sealer WB
Tenon® 40% Silane Sealer WB is a VOC-compliant, clear, non-yellowing concrete sealer that penetrates deeply and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and spalling, freeze damage, and rebar corrosion due to moisture interaction. It is suitable for use to protect and seal fully cured new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer WB is designed for use above-grade exterior applications that are not subjected to hydrostatic pressure. Available in 1 gal. bottles (BOM #114417), 5 gal. bottles (BOM #114427), and 55 gal. drums (BOM #114415).
-
Tenon® Concrete & Masonry Sealer WB
Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gal. bottles (BOM #120673) and 5 gal. pails (BOM #120674).
-
Tenon® 100% Silane Sealer
Tenon® 100% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry in order to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect and seal fully cured fresh concrete, cast in place, precast, and high-strength concrete materials. 100% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. It is excellent for treating high-traffic areas or surfaces that receive high salt concentrations such as coastal piers. Available in 1 gal. bottles (BOM #129890), 5 gal. pails (BOM #129900), and 55 gal. drums (BOM #129652).
-
Tenon® 20% Silane Sealer
Tenon® 20% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect, and seal fully cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. Silane sealers are used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129980), 5 gal. pails (BOM #129970), and 55 gal. drums (BOM #129644).
-
Tenon® Siloxane Final Seal
Tenon® Siloxane Final Seal is an aromatic, solvent-based concrete sealer and water-repellant used to protect cementitious surfaces against the damage caused by water penetration. Can be applied to surfaces where a cure and seal coating was previously applied. Available in 1 gal. bottles (BOM #120828), 5 gal. pails (BOM #120827), and 55 gal. drums (BOM #120829).