High Performance Masonry
-
Tenon® Adhesive Base Coat PM
Tenon® Adhesive Base Coat PM (BOM# 114899) is a dry-mix, polymer-modified adhesive and base coat requiring only water for mixing.
-
Tenon® Masonry Cement
Tenon® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #114094) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #114095) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #114096) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.
-
Tenon® Masonry Veneer Joint Grout
Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand that is specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. It is preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Masonry Veneer Joint Grout creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466) in 50 lb. bags.
-
Tenon® Masonry Veneer Mortar PM
Tenon® Masonry Veneer Mortar PM (Polymer-Modified) (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried sand, and special performance admixtures creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting yet it is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C1714 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry; ASTM C270 Standard Specification for Mortar for Unit Masonry; ANSI 118.4 Standard Specifications for Modified Dry-Set Cement Mortar; and ACI 530 Shear Bond Standards.
-
Tenon® Masonry Veneer Mortar HB
Tenon® Masonry Veneer Mortar HB (High Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Masonry Veneer Mortar HB is a blend of cementitious materials, oven-dried sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4 Standard Specifications for Dry-Set Cement Mortar (unmodified mortar); ANSI A118.11 Standard Specifications for EGP (Exterior Glue Plywood) Latex-Portland Cement Mortar (mortar which will bond to plywood); ANSI A118.15 Standard Specifications for Improved Modified Dry-Set Cement Mortar (improved modified mortar); and ASTM C270 Standard Specification for Mortar for Unit Masonry.
-
Tenon® Waterproofing & Crack Isolation Membrane
Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied; dries to dark orange. Available in 1 gal. pails (BOM #120675) and 5 gal. pails (BOM #120676).