Horizontal Repair
-
Tenon® Critical Pavement Repair (CPR)
Tenon® Critical Pavement Repair (CPR) (BOM #113091) is a preblended, single-component repair mortar designed to be a quick, durable repair for essential heavy-duty surfaces. This includes airport runways, concrete highways, parking structures, freezer rooms, loading docks, industrial floors, and more. It is fast-setting, high-strength, polymer-modified, and fiber-reinforced as well as freeze-thaw durable. Critical Pavement Repair contains corrosion inhibitors to mitigate corrosion issues. It can be trowel applied on horizontal or vertical surfaces or pumped into place for formed vertical and overhead repairs. Meets ASTM C928 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs.
-
Tenon® Air-Entrained Concrete Patching Mix AE
Tenon® Air-Entrained Concrete Patching Mix AE (3U58M) (BOM #126199) is an ideal material for repairing concrete pavement, bridge decks, industrial floors, concrete parking lots, and garage decks. This pre-blended mixture of cement, aggregate, and special additives will produce a high strength concrete repair material that is extremely durable and works well in harsh environments. Additionally, when used with Tenon Fast-Set Liquid Activator, surfaces can be reopened to traffic within 4 to 5 hours under typical conditions.
-
Tenon® Concrete Patching Mix
Tenon® Concrete Patching Mix (BOM #126198) is a dry-mixed combination of Portland limestone cement and aggregates that is proportioned and manufactured according to MNDOT specification 3105 for grade 3U18. When mixed according to specifications with water and admixtures, it is an ideal mixture for repairing concrete pavement, industrial floors, and structural concrete.
-
Tenon® Concrete Resurfacer
Tenon® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance, polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, it is walkable on average in 2 hours.
-
Tenon® Metro Mix™
Tenon® Metro Mix™ (BOM #128260) is a high-performance concrete mix engineered to meet commercial/industrial ready-mix specifications. It is super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready-mix truck access is restricted. Use for structural applications and full depth repairs of 2" (51 mm) or greater. Exceeds ASTM C387 Standard Specification for Packaged Dry Combined Materials for Mortar and Concrete.
-
Tenon® Metro Mix AE
Tenon® Metro Mix AE (BOM #128270) is the air-entrained version of our high-performance concrete mix engineered to meet commercial/industrial ready-mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. It is ideal for projects requiring small structural concrete applications or when ready-mix truck access is restricted. Use for structural applications and full depth repairs of 1½" (51 mm) or greater. Exceeds ASTM C 387 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar.
-
Tenon® Partial Depth Concrete Patch
Tenon® Partial Depth Concrete Patch is ideal for placing overlays less than 2” deep (5 cm). This pre-blended cement and oven-dried sand mixture will produce a high-strength concrete repair material that is extremely durable in partial depth applications such as concrete pavements, bridge decks, industrial floors, concrete parking lots, and garage decks. It is also used for adhering pavers to concrete steps and walks, patching and/or leveling concrete surfaces, filling large cracks, and filling cores in masonry block or brick. Available in these ratios of fine sand aggregate to Portland cement in 50 lb. bags: 2:1 mix (BOM #120722), 2.5:1 mix (BOM #120723), or 3:1 mix (BOM #120724).
-
Tenon® Pourable Concrete Patch
Tenon® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, it can also be used as a wearable surface for residential and light-duty commercial applications. Meets ASTM C387 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete for normal weight concrete.
-
Tenon® Rapid Patch® 100
Tenon® Rapid Patch® 100 (BOM #120970) is a fast-setting, fiber-reinforced, high-strength, cement-based repair mortar designed for applications where high early strength gain is needed to reduce down time. Apply neat from 1/2" to 2" deep, or it can be extended for repairs greater than 2" deep.
-
Tenon® Rapid Patch® 200
Tenon® Rapid Patch® 200 (BOM #120971) is a rapid-setting, fiber-reinforced, high-strength, polymer-modified cement mortar designed for concrete repair and overlay applications requiring high durability. Apply neat from 1/2" to 2" deep or it can be extended for repairs greater than 2" deep. This product has a wide temperature range for application.
-
Tenon® Commercial DOT Repair
Tenon® Commercial DOT Repair is a rapid-setting, high-strength, polymer-modified, one-component hydraulic cement mortar designed for concrete repair and overlay applications requiring high durability. It is resistant to salts, grease, oil, and other chemicals often found in the transportation environment. Commercial DOT Repair is approved by MNDOT for "Rapid Hardening Materials for Repairs" and WYDOT for "Bridge Concrete Repair." Meets or exceeds ASTM C928-R3 Standard Specification for Packaged, Dry, Very Rapid, Hardening Cementitious Materials for Concrete Repair. Available in 50 lb. bags "Neat" (BOM # 100689) and "Extended" (BOM #110735).
-
Tenon® Rapid Strength Concrete Mix SE
Tenon® Rapid Strength Concrete Mix SE (BOM #120965) is a commercial-grade blend of fast-setting cement, sand, gravel, and other proprietary performance additives designed to provide extended working time and high early strength for concrete applications requiring a minimum thickness of 1.5 in. (38 mm). Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack resistance and increased toughness.
-
Tenon® Self-Consolidating Concrete Mix CI
Tenon® Self-Consolidating Concrete Mix CI (BOM #112026) is a dry, preblended, one-component, self-consolidating, cementitious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1 in. (2.5 cm) and maximum thickness of 8 in. (20 cm). Also available with integral water repellent (IWR) Tenon Self-Consolidating Concrete Mix CI/IWR (BOM #114393).
-
Tenon® Vinyl Concrete Patch
Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather edge to 2 in. (2 mm - 51 mm) thick per lift. Typically supports foot traffic in 8-12 hours and wheeled traffic in 48 hours. Available in 10 lb. pails (BOM #127634) and 50 lb. bags (BOM #120681).